Frameology

How to Install a Black Label Luxe Wall Frame with Wide Mat

How to Install a Black Label Luxe Wall Frame with Wide Mat

By Frameology | Published: 2026-10-24

Category: How-to Guides

Learn how to install your Frameology Black Label Luxe Wall Frame with wide mat. Follow these step-by-step instructions for a secure and level wall mount.

Quick answer

To install your Black Label Luxe Wall Frame with wide mat, start by choosing the right hardware for your wall type, then mark the hanging point using the frame's wire hanger, and finally level and secure the frame in place.

What makes the Luxe Wall Frame different

The Luxe Wall Frame is a gallery-quality piece made in the USA with premium materials. Its wide mat adds depth and a professional look, but also means the frame is heavier than standard frames. The wood is milled at Frameology's own North Carolina factory, and your photo is printed on Entrada Archival 100% cotton fine-art paper for stunning color. This quality construction requires careful handling during installation.

Step-by-step installation guide

  1. Choose the right hardware for your wall: For drywall, use a wall anchor and screw rated for at least 20 lbs. For plaster or concrete, use a masonry anchor. The Luxe frame with wide mat is heavier than a basic poster frame, so don't rely on a simple nail. Check the frame's weight by holding it before drilling. If in doubt, use a stud finder and mount into a wall stud.
  2. Mark the hanging point: Hold the frame against the wall at your desired position. Lightly mark the top center with a pencil. Then, pull the wire up toward the center of the frame to simulate the hanging point. Measure from the wire's peak to the top of the frame. Subtract that distance from your top-center mark to find where the hook or nail should go. A common mistake is forgetting to account for the wire slack. Always pull the wire taut when measuring.
  3. Install the wall hook or anchor: Drill a pilot hole if needed, then insert the wall anchor or screw the hook into the mark. Ensure the hook is level by checking with a small bubble level. If the hook is slightly off, the frame will hang crooked. Double-check level before hanging the frame.
  4. Hang the frame and check level: Place the wire over the hook. Let the frame settle, then place a level on top of the frame. Adjust the frame left or right on the hook until it is level. The wire hanger allows minor adjustments. If the frame is still crooked after adjusting, the hook may be installed incorrectly. Remove and reposition it.
  5. Final adjustments and care: Once level, gently press the frame against the wall to ensure it sits flush. Avoid touching the mat or print surface with dirty hands. Use a microfiber cloth to wipe the frame if needed. The wide mat can collect dust over time. Clean it with a soft brush or compressed air to avoid scratching.

Product details

  • Luxe Wall Frame - Black (With Wide Mat): The Luxe Wall Frame features a 1-inch wide profile and comes with a finished paper back and wire hanger. The wire hanger is pre-installed, so you only need to add a wall hook or nail at the correct height.
    Luxe Wall Frame - Black (With Wide Mat)
    Luxe Wall Frame - Black (With Wide Mat)

Shop Related Products

Luxe Wall Frame - Black (With Wide Mat)

Luxe Wall Frame - Black (With Wide Mat)

$49.77 $79.00

Shop Now