Quick answer
Hang the Bobby Berk Vertical Grid without nails by mounting each of the nine 12" x 12" frames with heavy-duty adhesive strips rated for its weight, using the included printed template to place them in a true 3x3 grid. Check every frame with a level before pressing the strips firmly.
Why adhesive strips work for this float-mount grid
The Vertical Grid uses nine separate 12" x 12" wood frames, each holding an 8" x 8" float-mounted photo. Because the frames are individual, you can position each one with strips instead of a single nail or cleat. This spreads the load and avoids drilling into the wall, which matters in a rental.
Adhesive strips are not invisible magic: they need a clean, flat, painted or smooth surface. Skip them on textured wallpaper, fresh paint that has not fully cured, or surfaces that flake. In those cases, a small nail or a freestanding shelf may be the safer route.
Check the frame weight and strip rating before you buy
The catalog does not list a per-frame weight for the Vertical Grid, so you cannot assume a standard strip will hold it. Weigh one assembled frame on a kitchen scale, then choose strips whose package states a safe working load above that number. Use two strips per frame as a minimum and follow the strip maker’s cure time before hanging.
When no-drill hanging is not the right choice
Adhesive strips can fail on walls with loose plaster, heavy texture, or direct sun that softens the adhesive. If you cannot press firmly across the whole strip or the wall feels uneven, use the included template to mark nail or anchor points instead. The goal is a secure gallery wall, not a no-hole rule at any cost.
Step-by-step: hang the Vertical Grid without nails
- Weigh one assembled frame: Remove one frame from the set, fit its float-mounted photo, and weigh it on a kitchen scale. Choose adhesive strips rated well above that weight, using at least two strips per frame. Common mistake: guessing the weight and buying light-duty strips. Write the frame weight on the strip package so you do not mix up ratings later.
- Clean and test the wall surface: Wipe the wall with a damp cloth and let it dry fully. Press a strip to the wall, wait a few minutes, then peel it off; if paint or texture comes away, stop and choose a different wall or method. Common mistake: skipping the test patch on fresh paint. A failed test patch means no-drill hanging is not safe on that wall.
- Position the printed template: Tape the included template to the wall at your chosen height, usually eye level for the center row. Use a level to make sure the template is straight before marking. Common mistake: trusting the template’s edges without checking level. Mark the center of each frame opening lightly in pencil so you can remove the template before sticking strips.
- Attach strips to each frame: Press two or more strips firmly to the back of each frame, following the strip maker’s instructions for which side faces the wall. Let the adhesive set for the recommended time before hanging. Common mistake: pressing strips onto dusty or oily frame backs. Wipe each frame back with a dry cloth before applying strips.
- Hang the center frame first: Align the first frame with the center mark on the template, press it firmly against the wall for the full time the strip maker specifies, then check it with a level. Common mistake: rushing the press and letting the frame sag. Wait the full cure time before adding the next frame.
- Build outward in the 3x3 grid: Hang the remaining frames one at a time, working from the center row outward and checking level after each. Keep the gaps even by referring to the template marks. Common mistake: hanging all frames before checking whether the first one shifted. If a frame is off level, remove it slowly and reposition rather than forcing it.
- Remove the template and do a final level check: Peel away the template without pulling on the frames. Run a level across each row and down each column, and press any frame that sits proud. Common mistake: leaving the template up and hiding a crooked frame. Take a photo of the finished wall so you can re-create the layout after moving.
Product facts
- Bobby Berk - The Vertical Grid - Black (Float Mount): Includes nine 12" x 12" luxe wood square frames, each with an 8" x 8" float-mounted photo, plus a printed professional hanging template. The template lets you mark all nine frame positions before sticking anything to the wall, so the 3x3 grid stays aligned without nails.

Bobby Berk - The Vertical Grid - Black (Float Mount)


