How to Hang Bobby Berk The Vertical Grid Level and Straight
By Frameology | Published: 2026-11-01
Category: How-to Guides
Learn how to hang Bobby Berk The Vertical Grid level and straight on drywall, with a step-by-step process for perfect spacing, height, and alignment.
Quick answer
Hang Bobby Berk The Vertical Grid level and straight by using the included printed hanging template and a spirit level to mark each frame's position, then secure the frames with the provided hardware. Work from the center outward and check level after every frame.
Why drywall type and frame weight matter
The Vertical Grid includes nine 12" x 12" wood frames, so the total load is spread across a wide area. On standard drywall, use the supplied anchors or locate studs where possible. If you have steel studs or plaster walls, the included hardware may not be suitable; consult a professional or use appropriate fasteners.
Choosing the right hanging height
The ideal center of the grid is typically 57–60 inches from the floor, but consider your ceiling height and furniture. For a sofa or console, leave 6–8 inches between the furniture top and the bottom frame. The included template helps you visualize placement before drilling.
Common mistakes that cause crooked lines
Rushing the template placement, skipping level checks between frames, and using the wrong anchors are the main culprits. Also, avoid hanging frames directly over a wall stud without checking for obstructions like wiring or plumbing.
Step-by-step hanging process
- Prepare the wall and gather tools: Clear the area below, then gather a spirit level, pencil, tape measure, drill, and the included template and hardware. Check for studs with a stud finder and mark their locations lightly. Avoid drilling into studs unless you confirm no wires or pipes are present.
- Position the template at the correct height: Tape the printed template to the wall so its center aligns with your planned center height (typically 57–60 inches from the floor). Use a level to ensure the template is perfectly horizontal. Double-check that the template is level before making any marks.
- Mark all frame positions: Use a pencil to mark the hanging points indicated on the template for each of the nine frames. Verify each mark with a level and tape measure. Measure twice: a small error at this stage multiplies across the grid.
- Install anchors and screws: Drill pilot holes at the marked points and install the supplied drywall anchors. Drive screws leaving them protruding slightly for hanging. Use the correct drill bit size for the anchors to avoid wall damage.
- Hang frames from the center outward: Start with the center frame, then work outward in a cross pattern. After hanging each frame, place a level on top to confirm it is straight. If a frame is crooked, adjust the screw depth or use a small shim behind the frame.
- Final level check and adjust: Once all frames are hung, check the entire grid with a long level or a laser level. Make minor adjustments by loosening screws or adding felt pads to the back of frames. Small corrections now prevent visible misalignment later.
Product facts
- Bobby Berk - The Vertical Grid: Includes a printed professional hanging template for easy alignment. The template eliminates guesswork, so you can mark all nine frame positions accurately before drilling.
Bobby Berk - The Vertical Grid - Bobby Berk - The Vertical Grid: Nine 12" x 12" luxe wood square frames with 4" x 6" matted photos. Each frame is lightweight enough for drywall anchors, but the total set requires even weight distribution.
