What makes HD Metal Print care different
HD Metal Prints are not framed paper prints. The image is infused directly into aluminum using dye sublimation, so there is no glass to clean and no mat to keep dry. The surface is glossy, which helps colors pop but also makes smudges and fingerprints easier to see. The good news: the print is scratch resistant, UV resistant, and waterproof, so routine care is simpler than you might expect.
Because the print is lightweight and available up to 24x36, handling and hanging need a little planning, especially at larger sizes. The steps below focus on what the catalog confirms and what you can reasonably do to keep the surface clean and the print looking its best.
Handling your metal print: start with clean hands
The glossy finish shows fingerprints readily, so handle the print as little as possible and always with clean, dry hands. If you need to move it, hold it by the edges rather than the face.
- Hold by the edges: Gripping the print by its sides reduces the chance of transferring oils or dirt to the image area.
- Avoid touching the face: Even clean hands can leave marks on a glossy surface. If you must steady the print, use the back or edges.
- Keep the original packaging for transport: If you need to move or store the print, the packaging it arrived in is the safest way to protect the surface from scratches.
- Handle large sizes with two people: The 20x30 and 24x36 sizes are lightweight but still awkward to maneuver alone. A second pair of hands helps prevent accidental drops or flexing.
How to clean a metal print without streaks
The print is waterproof and scratch resistant, so a simple cleaning routine is safe. The goal is to lift fingerprints and dust without abrasive rubbing.
- Dust first: Use a soft, dry microfiber cloth to gently wipe away loose dust. Avoid paper towels or anything that could leave lint.
- Dampen the cloth, not the print: Lightly mist a clean microfiber cloth with water. Do not spray directly onto the print, especially near the edges.
- Wipe gently in one direction: Use light pressure and avoid circular scrubbing. The glossy finish can show swirl marks if you rub too hard.
- Dry immediately: Buff the surface with a dry microfiber cloth to prevent water spots. The print is waterproof, but standing droplets can leave mineral marks as they dry.
- Check for remaining fingerprints: If smudges persist, repeat with a clean section of the cloth. Avoid harsh cleaners or abrasive pads, which are not needed and could dull the finish.
Removing fingerprints from a glossy metal print
Fingerprints are the most common issue with glossy metal prints because the surface shows oils clearly. A dry microfiber cloth often lifts fresh prints. For set-in marks, a slightly damp cloth followed by a dry buff usually works. Do not use glass cleaner or ammonia-based products unless the manufacturer confirms they are safe; the supplied information does not list approved cleaners, so stick with water and microfiber. If a mark does not come off with gentle cleaning, stop rather than scrubbing, which could scratch the finish.
Metal print hanging tips for a clean, secure display
The HD Metal Print is lightweight, which makes hanging easier, but larger sizes still need proper support. The catalog does not specify a hanging hardware system, so check the back of your print and use hardware rated for its size and weight.
- Choose a spot away from direct handling: Hallways and high-traffic areas increase the chance of fingerprints. If you hang there, be prepared to clean more often.
- Avoid direct sunlight if you want to preserve color: The print is UV resistant, but prolonged direct sun can still affect any artwork over time. Indirect light is safer for long-term display.
- Use a level for straight edges: Metal prints have clean, rigid edges, so any tilt is noticeable. A level helps you get it right the first time.
- Consider the wall material: Drywall anchors may be needed for larger sizes. Follow the hardware instructions and use anchors rated for the print's weight.
- Leave breathing room: A little space around the print keeps the focus on the image and makes cleaning easier.
Size and finish details that affect care
- HD Metal Print: Available in 8x10, 11x14, 12x12, 12x18, 16x20, 16x24, 20x30, and 24x36, all with a glossy finish. Larger sizes are more prone to handling marks and may need two people to hang; the glossy finish is the reason fingerprints show.

HD Metal Print - HD Metal Print: Scratch resistant, UV resistant, and waterproof. These properties mean you can clean with a damp cloth and display in most rooms without worry, but they do not make the print immune to abrasive cleaners.
- HD Metal Print: Lightweight and perfect for large format up to 24x36. Lightweight construction makes hanging easier, but large prints still require secure mounting.
Long-term metal wall art maintenance
A quick dusting every few weeks keeps the glossy surface looking fresh. If you notice fingerprints, clean them promptly rather than letting oils sit. Avoid hanging the print where it will be touched often, such as above a light switch or in a narrow hallway. The print is waterproof, so a humid bathroom is not automatically off-limits, but check that the hanging hardware is suitable for the environment. The catalog does not provide specific humidity limits, so use your judgment. With minimal care, the HD Metal Print should stay vivid and scratch-free for years.


